收藏本站
收藏 | 投稿 | 手机打开
二维码
手机客户端打开本文

Modeling Flow Stress of 70Cr3Mo Steel Used for Back-Up Roll During Hot Deformation Considering Strain Compensation

REN Fa-cai  CHEN Jun  
【摘要】:A constitutive model incorporating the influence of strain developed based on the Arrhenius equation by considering the variation of material constants as a fifth polynomial function of strain is presented.Materials constants are fit to data from hot compression tests of 70Cr3Mo steel used for back-up roll at the temperatures from1 173to 1 473Kand strain rates from 0.01to 10s-1 by using a Gleeble-1500Dthermo-mechanical simulator.The developed constitutive model is then used to predict the flow stress under all the tested conditions.The statistical parameters of correlation coefficient and average absolute relative error are used to analyze the predictable efficiency and the values are 0.997and 3.64%,respectively.The results show a good agreement between experimental stress and predicted stress.

知网文化
 快捷付款方式  订购知网充值卡  订购热线  帮助中心
  • 400-819-9993
  • 010-62982499
  • 010-62783978