铸造技术-2008年第08期

当前位置：期刊导航 > 理工B(化学化工冶金环境矿业) > 冶金工业及金属 > 铸造技术

铸造技术

Foundry Technology

主办：中国铸造协会;西安铸造学会

周期：月刊

出版地：陕西省西安市

语种：中文

开本：大16开

ISSN 1000-8365

CN 61-1134/TG

邮发代号 52-64

曾用西安铸造

创刊年：1979

中国期刊网来源刊

2004版核心期刊

同类杂志推荐


	China Welding
	焊接
	焊接技术
	焊接学报
	Journal of Iron and Steel Research(International)
	炼钢
	炼铁
	特殊钢
	轧钢
	中国铸造装备与技术

[定制推送服务] [收藏本刊文章] [RSS 订阅]

铸造技术

2008年08期

	贾成炳理事长在中国铸造协会第五届第三次理事会会议上的讲话(节选)
	协会动态
	“绿色制造—节能减排百城巡展”启动会在京隆重举行
	我国汽车零部件产业研发投入不足亟待改观
	中钢衡重攻克三峡升船机齿条铸造难关
	行业企业市场
	阀门铸钢件的缩松、夹杂类缺陷分析及工艺控制 Analysis and Process Control of Shrinkage and Inclusion Defects of Valve Steel Casting		陈淑惠
	球铁连杆中心反白口的防控措施 Prevention of Reverse Chill in the Centre of Spheroidal Graphite iron Connecting Rod		冯英宇
	铸造过程精确验证活塞重量的新工艺 New Technology for Accurately Validating Piston Mass during Casting Process		张屹林
	高频磁场下两段式无缝结晶器内磁场分布和弯月面的实验研究 Experimetal Study on Distribution of Magnetic Field and Meniscus Shape in Two-stage Slitless Mold with High Frequency		金百刚王强高翱杨景烽赫冀成
	斜坡长度对M2高速钢坯料显微组织的影响 Influence of Inclined Slope Length on the Microstructure of M2 High Speed Steel Ingots		和优锋邢书明谢水生黄国杰程磊
	网络陶瓷增强铝基复合材料的摩擦磨损性能及磨损模型研究 Study on Friction and Wear Resistance and Wear Model of Aluminum Matrix Composites Reinforced with Network Ceramics		尧军平杨林强
	1~#稀土变质处理Fe-Cr-B合金组织研究 Investigation of Microstructure of Fe-Cr-B alloy Modified by 1~# Rare Earth		王彩东郭长庆程军高明星
	ANSYS在采煤机制动器摩擦片温度场分析中的应用 Application of ANSYS in the Thermal Field Analysis of Coal Cutter Brake Friction Disk		杨海东王瑜呼靳宏
	CO_2硬化工艺用改性水玻璃的合成研究 Research on the the Synthesis of Modified Sodium Silicatefor CO_2 Hardening Process		许进
	微合金抗磨钢的应用研究 Application of Microalloying Abrasive Resistance Steel		蔡擎杨哿
	服役前后减摩钢的组织分析 Analysis on Microstructure of Anti-friction Steels Before and After Service		高巍王正品金耀华石崇哲雷小侠
	铝对高铬耐磨铸铁组织与性能的影响 Effect of Al on the Mocrotructure and Properties of Wear Resistance High Chromium Cast Iron		王华张云鹏李爽
	电磁搅拌条件下钢铁材料半固态组织形成机制探讨 Discussion on Evolution Mechanism of the Semi-solid Microstructure of Steel Under Electromagnetic Stirring		高军芳赵爱民
	电磁制动对连铸结晶器内流体流动的影响 Influence of Electromagnetic Brake on the Fluid Flow in the Slab Continuous Casting Mold		陈芝会王恩刚雷洪赫冀成
	铝合金异相位电磁连铸技术研究 Investigation of Out-phase Electromagnetic Continuous Casting of Aluminum Alloy		赵志浩朱庆丰左玉波崔建忠
	Ca对AZ61-1.2Y镁合金组织和力学性能的影响 Effects of Ca on Microstructure and Mechanical Properties of AZ61-1.2Y Magnesium Alloy		陈君李全安张兴渊李克杰
	镁合金表面电子束熔覆铝涂层 Electron Beam Cladding Al Coating on Magnesium Alloy		叶宏闫忠琳薛志芬
	基于正交回归的高硅活塞合金高温性能研究 High Temperature Property Study of High Silicon Aluminum Piston Alloy Based on Orthogonal Test Design		胡慧芳李华基薛寒松孔凡校
	挤压态AZ31镁合金高温蠕变性能的试验研究 Experimental Study of High Temperature Creep Property of the As-extruded AZ31 Magnesium Alloy		张诗昌朱明胡衍生宗钦
	一种新型快干增强硅溶胶的试验 Trials on a New Quick-drying and Enhanced Silica Sol		田培凤吕志刚季晓玲章浩龙姜不居闫双景
	多元铝青铜气孔形成机理及消除措施 The Formation Mechanism of Pinhole in Aluminum Bronze and Elimination Measures		子澍
	中国实型(消失模)铸造的现状与展望 Status and Prospect of Full Mold(Expendable Pattern) Casting Process in China		梁光泽李增民
	中国铸造协会实型铸造专业委员会
	我国消失模铸钢发展现状 Status of Lost Pattern Cast Steel in China		王亮叶升平
	中国机械工程学会铸造分会消失模铸造技术委员会
	铸件挽救工程的绿色性与挽救技术 Green Characteristic and Rescue Technique of Casting Rescue Engineering		钱翰城
	铸造缺陷修补机在刹车盘修复中的应用 Application of Casting Defect Repair Machine in the Brake Renovation		彭兴礼
	浸渗技术的应用 Application of Infiltration Technology		王乾荣魏国华
	自熔性合金粉喷焊修补铸件技术 Self-fluxing Alloy Spray-welded Casting-Renovating Technology		王多
	紫铜/Cu-Cr合金配副载流性能与摩擦性能的关系研究 Investigation on Relationship Between Loading Current and Frictional Behaviors in Copper/Cu-Cr Alloy Pairs		徐晓峰上官宝宋克兴张永振
	固化工艺对聚酰亚胺复合材料影响研究 Effect of the Curing process on the Polyimide Composite		王铎翟宝清
	氩弧熔覆Mo-Ni-Si复合涂层组织与性能的研究 Microstructure and Properties of Composite Coating by Gas Tungsten Arc Welding Using Mo-Si-Ni Powders		王振廷陈丽丽王永东
	铝粉末模压成型的三维有限元数值模拟 3D-Finite Element Simulation of Aluminum Powder Compaction Process		董洁袁守谦刘晓燕张从容
	CdO电子结构的第一性原理计算 First-Principle Calculation of Electronic Structure of CdO		宋永东黄同吕淑媛
	介电性材料聚酰亚胺的改性研究 Study on Modification of Dielectric Polyimide		翟宝清
	ELID超精密磨削砂轮表面氧化膜形成行为的实验研究 Experimental Study on the Growth Behaviors of Oxide Layers in ELID Pre-dressing Process		朱育权马保吉 D.J.Stephenson
	ANSYS在双金属复合铸造中的运用 Application of ANSYS in Bimetal Composite Casting		邱逊吴振卿
	自主技术创新是我国中小铸造企业生存与发展的途径 Independent Technology Innovation is the Sole Approach for Small and Medium Sized Foundry Enterprises to Survive and Develop		朱兆开
	合金材料阻尼特性参数识别研究进展 Progress in Characteristics Identification of Damping Alloy		吴子英刘宏昭刘丽兰原大宁张忠明
	铸造用金属液过滤器及其应用 Molten Metal Filter and Application in the Foundry		魏兵唐一林祝建勋张科峰朱能山龙礼贤
	内氧化法制备Al_2O_3/Cu复合材料的研究进展 Research Progress on Al_2O_3/Cu Composite Prepared by Internal Oxidation		苏凡凡张旦闻赵冬梅任凤章田保红贾淑果
	材料表面激光合金化研究进展 Research Progress on Laser Surface Alloying		李贵江许长庆孟丹穆志宏
	高铬铸铁窄流道叶轮的铸造工艺 Foundry Technology of Narrow Flow-channel Impeller of High Chromium Cast Iron		刘红兰
	离心铸铝模结构改进 Improvement of As-cast Aluminum Centrifugal Mould		吴凡
	利用球铁石墨化膨胀原理改进氧气压缩机曲轴工艺 Improvement on the Technology of Crankshaft of Oxygen Compressor by the Principle of Graphitization Expansion		金至开
	运用华铸CAE/InteCast工艺分析软件优化铸钢件补缩系统 Optimization of Feeding System of Steel Casting by CAE/InteCast Software		刘霄
	铁路轨道垫板铸件断裂原因分析与改进 Analyses on the Cause of Fracture Defects of Steel Plate Casting for Backing Railway Track and its Prevention Measures		李勇李刚生李进福
	强韧性高锰钢衬板的开发和应用 Development and Application of High Manganese Liner with Good Strength and Toughness		赵金山曹振学司应新杜好千
	WCB阀门铸钢的生产工艺 Foundry Pocess of WCB Steel Valve		柴知章

往期检索

共190期

铸造技术：2008年各期

[08] [07] [06] [05] [04] [03] [02] [01]

铸造技术：2007年各期

[S1] [12] [11] [10] [09] [08] [07] [06] [05] [04] [03] [02] [01]

铸造技术：2006年各期

[12] [11] [10] [09] [08] [07] [06] [05] [04] [03] [02] [01]

铸造技术：2005年各期

[12] [11] [10] [09] [08] [07] [06] [05] [04] [03] [02] [01]

铸造技术：2004年各期

[12] [11] [10] [09] [08] [07] [06] [05] [04] [03] [02] [01]