当前位置:期刊导航  >  理工B(化学化工冶金环境矿业)  >  冶金工业及金属  >  物理测试  

  物理测试
       Physics Examination and Testing
主办:  钢铁研究总院
周期:  双月
出版地:北京市
语种:  中文
开本:  大16开

ISSN 1001-0777
CN 11-2119/O4
创刊年:1983
中国期刊网来源刊

同类杂志推荐

[收藏本刊文章] [RSS 订阅]
物理测试
2008年03期
目 录
喷射成形GCr15钢过喷粉末研究
Investigation on Sprayed Powder of GCr15 by Spray Forming
王爱敏 张胤 许文峰 沈华 贺友多
60Si_2CrVAT弹簧钢疲劳性能试样中未溶相的差异与分析
Difference and Analysis of Undissolved Phase in Sample of Fatigue Performance Test for Spring Steel 60Si_2CrVAT
侯淑荣 李辉
DSC法研究低合金钢中奥氏体→珠光体转变动力学
Study on Transformation Kinetics of Austenite to Pearlite in Low Alloy Steel by DSC
王亚楠 肖心萍 周慧敏
50Ah圆柱形锂离子电池研究
Research for Lithium Ion Battery of 50 Ah Cylinder
程福龙
镁铬残砖的显微结构研究
Study on Broken MgO-Cr_2O_3 Brick
宋霞 王芙云
磁场退火对Fe_(80)Si_9B_(11)非晶合金铁芯磁性能的影响
Effect of Magnetic Field Annealing on Magnetic Properties of Fe_(80)Si_9B_(11) Amorphous Metallic Cores
李山红 卢志超 李德仁 周少雄
SPA-H集装箱板高温力学性能研究
Investigation on Mechanical Properties at Elevated Temperature for SPA-H Container Sheet
唐小勇 江海涛 唐荻 熊自柳 李烁 张梅
《钢铁》、《中国冶金》、《钢铁研究学报》、《物理测试》2008年重要征订启事
GCr15棒材轧后快冷过程温度场模拟分析
Temperature Field Analysis of GCr15 Bearing Steel during Rapid Cooling After Hot-rolling
何小丽 赵宪明 马宝国 郑雨旸
棒材试样加工又添新产品
非晶Fe_(85.9)Nb_(0.25)Nd_(7.5)B_(5.5)Dy_(0.75)Cu_(0.1)合金中α-Fe相的晶化动力学
Crystallization Kinetics of α-Fe Phase in Fe_(85.9)Nb_(0.25)Nd_(7.5)B_(5.5)Dy_(0.75)Cu_(0.1) Amorphous Alloy
肖心萍 王亚楠
NH_3对CuBiAl合金在3.5%NaCl溶液中的腐蚀性能的影响
Effect of NH_3 on Corrosion Property of CuBiAl Alloy in 3.5% NaCl Solution
寇朝阳
激光测厚仪在宝钢300t钢包上的应用
Application of Laser Thickness Gauge to 300 t Ladle of Baosteel
蒋鹏 汪宁 方善华 陈向东 顾汉华
用简易方法制备YBCO超导体的R-T曲线研究
Study on R-T Curve of YBCO Superconductor Made by Simple Method
陶光胤 王洪涛 王振杰
高强度螺栓抗拉强度测量不确定度的评定
Uncertainty Evaluation for Tensile Strength of High Strength Bolts
周建江 刘杏 严峻 管亿龙 陈鹏
英标460钢筋弯曲断裂分析与改进
Analysis and Improvement of Bending Fracture for Britain Standard 460 Ribbed Bar
仝丽珍 刘靖 蒋海涛
油门停车限动卡弹簧断裂分析
Fracture Analysis on Spring of Fuel Valve Shutdown Limiter
吕凤军 傅国如
不锈钢护栏锈蚀原因分析
Corrosion Analysis of Stainless Steel Railing
王明政 邓鑑清 刘胜英 王通波 王晓卨
不锈钢餐刀表面缺陷分析
Analysis on Surface Defect for Stainless Steel Knives
秦斌 王治宇 王军 顾家卿 陈旭
滲碳轴承钢套圈开裂原因分析
Aanlysis on Cracking Origin of Carburizing Bearing Steel Rings
马国安 刘杰
往期检索 共153期   
 物理测试:2008年各期 [03] [02] [01]
 物理测试:2007年各期 [06] [05] [04] [03] [02] [01]
 物理测试:2006年各期 [06] [05] [04] [03] [02] [01]
 物理测试:2005年各期 [06] [05] [04] [03] [02] [01]
 物理测试:2004年各期 [06] [05] [04] [03] [02] [01]
物理测试:更多年  [2003] [2002] [2001] [2000] [1999] [1998] [1997] [1996] [1995] [1994] [1993] [1992] [1991] [1990] [1989] [1988]
 [1987] [1986] [1985] [1984] [1983]