收藏本站
收藏 | 投稿 | 手机打开
二维码
手机客户端打开本文

A quantitative investigation of the influence with the components of the CMP alkali slurry on the polishing rate

樊世燕  刘恩海  张军  刘玉岭  王磊  林凯  孙鸣  石陆魁  
【摘要】:The influence of the components of an alkali polishing slurry and the mutual influences on the Cu polishing rate were investigated by a CMP polishing rate prediction model established with a modified artificial neural network based on the artificial bee colony algorithm. The quantitative method of sensitivity analysis was employed to fulfill the purpose of quantizing the influence on the polishing rate. The result of the analysis indicates that under certain CMP conditions, the Cu polishing rate was controlled by the silica abrasives, the FA/O chelating agent, the surfactant and the oxidant agent in the polishing slurry. Such factors showed the different sensitivity coefficients with 0.78, 0.53, 0.29 and 0.19 respectively on all the sample points. The mutual influence between the FA/O chelating agent and the oxidant agent on the polishing rate seemed obviously strongest when the proportion of them was 2 to 7, with the global sensitivity coefficients between 5 to 9; the mutual influence of silica abrasives and oxidant on the polishing rate was greater as the proportion of the above additives was beyond 5, with the global sensitivity coefficients between 2.5 and 6; the mutual influence of the surfactant and oxidant on the polishing rate was not obvious, with global sensitivity coefficients less than 3. Thus, it provides a kind of effective method for quantitating the influence with the components of the CMP alkali slurry on the polishing rate.

知网文化
【相似文献】
中国期刊全文数据库 前20条
1 林旺;阮育娇;陈松岩;李成;赖虹凯;黄巍;;The impact of polishing on germanium-on-insulator substrates[J];Journal of Semiconductors;2013年08期
2 苏建修;陈锡渠;杜家熙;康仁科;;Material removal rate in chemical-mechanical polishing of wafers based on particle trajectories[J];半导体学报;2010年05期
3 吕玉山;刘电飞;寇智慧;;An Investigation on a Tin Fixed Abrasive Polishing Pad with Phyllotactic Pattern for Polishing Wafer[J];Journal of China Ordnance;2012年03期
4 朱家祺;李群;冯建青;孟忠;李祯森;;Additional Polishing Process and the Pin-Up Speed Optimization for the Prevention of Linear Crack of BOC Chip[J];上海交通大学学报;2007年S2期
5 张泽芳;刘卫丽;宋志棠;;Effect of ammonium molybdate concentration on chemical mechanical polishing of glass substrate[J];半导体学报;2010年11期
6 安伟;赵永武;王永光;;Modeling and experimental research on a removal mechanism during chemical mechanical polishing at the molecular scale[J];半导体学报;2010年11期
7 胡轶;刘玉岭;刘效岩;王立冉;何彦刚;;Effect of copper slurry on polishing characteristics[J];半导体学报;2011年11期
8 门延武;张辉;周凯;叶佩青;;Wafer back pressure control and optimization in the CMP process[J];半导体学报;2011年12期
9 王波;;A New Method for the Ultra-smooth Machining of the Silicon Based Materials[J];Journal of Wuhan University of Technology(Materials Science Edition);2009年S1期
10 WANG TongQing;LU XinChun;ZHAO DeWen;HE YongYong;;Contact stress non-uniformity of wafer surface for multi-zone chemical mechanical polishing process[J];Science China(Technological Sciences);2013年08期
11 ;Scratch-concerned yield modeling for IC manufacturing involved with a chemical mechanical polishing process[J];Journal of Zhejiang University-Science C(Computers & Electronics);2012年05期
12 彭小强;焦飞飞;陈浩峰;铁贵鹏;石峰;胡皓;;Novel magnetorheological figuring of KDP crystal[J];Chinese Optics Letters;2011年10期
13 ;Fine Machining of Large-Diameter 6H-SiC Wafers[J];Journal of Materials Science & Technology;2006年05期
14 黄秋实;朱京涛;李浩川;沈正祥;王晓强;王占山;唐永建;;Thinning and polishing of cross-section of depth-graded WSi_2 /Si multilayer for linear zone plate application[J];Chinese Optics Letters;2012年01期
15 周隽雄;陈岚;阮文彪;李志刚;沈伟翔;叶甜春;;Dummy fill effect on CMP planarity[J];半导体学报;2010年10期
16 YU Guo-long;;Updating of Optical Inspection System for 6 GHz Superconducting Cavities[J];Annual Report of China Institute of Atomic Energy;2013年00期
17 王良咏;刘波;宋志棠;刘卫丽;封松林;黄丕成;S.V Babu;;Origin of high oxide to nitride polishing selectivity of ceria-based slurry in the presence of picolinic acid[J];Chinese Physics B;2011年03期
18 胡俊江;张磊;陈伟;周常河;胡丽丽;;Experimental investigation on laser-induced surface damage threshold of Nd-doped phosphate glass[J];Chinese Optics Letters;2012年04期
19 阮文彪;陈岚;李志刚;叶甜春;;Effects of pattern characteristics on copper CMP[J];半导体学报;2009年04期
20 苏建修;杜家熙;马利杰;张竹青;康仁科;;Material removal rate of 6H-SiC crystal substrate CMP using an alumina(Al_2O_3) abrasive[J];半导体学报;2012年10期
 快捷付款方式  订购知网充值卡  订购热线  帮助中心
  • 400-819-9993
  • 010-62982499
  • 010-62783978