| | | | | 样条有限条板梁结合单元 | | | 刘忠 | | | 本文采用最小势能原理,推导纵向用B_3样条函数表示的折板与梁条结合单元的刚度矩阵、荷载向量,并在计算机上实现了其分析过程。这种单元比简单的折板条单元更适合于T梁、脊骨梁、箱梁等桥梁结构的内力分析。 【作者单位】:重庆交通学院结构工程系 【关键词】:样条有限条;折板及梁条;箱梁 【DOI】:cnki:ISSN:1001-716X.0.1991-04-000 【正文快照】: 样条有限条是张佑启等’‘’在经典有限条基础上引进样条函数发展超来的。样条有限条在 条长方向采用 3次B样条函数代替经典有限条的正余弦函数,从而不仅克服了经典有限条法 在集中荷载、局部荷载作用下收敛性差的缺点,而且对各种边界条件的处理更为方便。本文 在此基础上提出 | | | 推荐 CAJ下载 PDF下载 | | | CAJViewer7.0阅读器支持所有CNKI文件格式,AdobeReader仅支持PDF格式 | | | | A New Type of Plate-Beam Spline Strip Elements | | | Liu Zhong Bridge and Structure Engineering Department | | | In this paper, applying the principle of stationary potential, the author developed a plate-beam spline element, worked out the stiffness matrix and load matrix, and programmed this method. It is found that this spline strip method is more efficent in the analysis of T-beams, spline girder and other bridges. 【Keyword】:spline strip, folded plates and beams, box girder, spline girder |
|
|